Tungsten vs Carbide Weight per Cubic Inch
Pure tungsten and cemented tungsten carbide are different materials.
Centerless vs Cylindrical Grinding for Carbide Parts
Choose between centerless and cylindrical grinding by workholding, reference geometry and the surfaces that must be related to one another.
Carbide Pin Applications: Locating, Guiding and Forming
Carbide pins can locate, guide or form, but those functions place different demands on support, fit and contact surfaces.
Carbide Stock Forms: Rods, Rectangular Blanks and Near-Net Shapes
Select starting stock by how much of it becomes the finished part and how it will be held during finishing.
Carbide Blank Grind Allowance: Drawing and RFQ Checklist
Grind allowance is intentional extra material between the supplied blank and the finished drawing.
Carbide Manufacturer vs Distributor: What to Verify
A manufacturer and a distributor can both be useful suppliers, but the label does not tell you who is responsible for each step.
Tungsten Carbide RFQ Checklist: Drawings, Grades and Inspection
A usable carbide RFQ connects the controlled drawing, material decision, supplied condition and inspection requirements.
Carbide Strength Explained: Compression, Bending and Brittleness
Hardness, compressive strength, bending strength and fracture toughness answer different questions.
Carbide vs Hardened Steel Wear Parts: When the Upgrade Pays
A carbide wear-part upgrade should earn its additional cost through measured production performance.
Calculate Carbide Rod Weight: Formula and Worked Example
A solid carbide rod weighs its cylindrical volume multiplied by the density of its specific grade.